(Product Discontinued)
20 Amp Current Capacity
Receptacles accept either 15 or 20 Amp equipment plugs for installation fexibility.
Inductorless Noise Filtration
Provides clean, capacitive filtered power to amplifiers without current limiting components (inductors) which impede performance.
One front Panel Convenience Outlet
For temporary power connections
Four Always-On Outlets
For equipment that requires continuous power.
For Switched Outlets
Controlled by either the front panel switch or DC voltage trigger. A Turn-On delay switch provides a 0 or 10 second delay for switched outlets.
DC Voltage Trigger
A standard 3.5mm mini-plug jack allows external control of start-up/shutdown sequencing.
Automatic Voltage Monitoring (AVM) Circuitry
AVM circuitry continuously monitors the incoming power for under or over voltage conditions. Power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Grounding Lug
Provides a common grounding point for equipment with seperate ground.
Optional Silver Front Bezel Available
Part# BEZ4400-S, $39.00 SRP
AC Specifications
| Line Voltage | 120VAC, 50/60 |
| Maximum Current Capacity | 20 Amps |
| Over-voltage shutoff | 147 ±8V |
| Under-voltage shutoff | 84V ±6V |
| Thermal Fusing | Yes |
| Initial Clamping Level | 200V Peak, 141V RMS |
| UL1449 Suppression Rating | 330V |
| Protection Modes | L-N, L-G, N-G |
| Response Time | < 1n |
| Single Pulse Energy Dissipation | 1650 Joules |
| Peak Impulse Current | 52,000 A |
DC Trigger Specifications
| Connection | 3.5mm, mini-plug |
| Voltage and Polarity | 5-30VDC, bi-directional |
| Current Requirement | <10mA |
(click any image to view larger)
Buy now from an authorized online dealer of Panamax products.
- Datasheet
M4400-20A - ManualM4400-20A
- View All Literature
