Improves Picture and Sound Quality
Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components
The M5300-EX is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.
Clean Power Level 4
Improves picture and sound quality by eliminating noise across the entire AC bandwidth. 40% more efficient at eliminating noise than Clean Power Level 3.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.
Indicator Lights
Shows the power status as well the incoming voltage.
11 outlets
4 always on, 4 switched, 2 high current, and 1 front panel convenience outlet.
3 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
12 Volt Trigger
Allows source equipment to activate or deactivate the outlets on the M5300-EX.
Coaxial Signal Line Protection
2 HD Sat and 2 HD CATV.
Rack-mountable
Rack mount brackets are included.
General
| Dimensions | 17" x 12.75" x 3.5" (4.1" Including feet) |
| Weight | 17 lbs. |
| Rack Ears | Included |
AC Power
| Line Voltage | 120V, 60Hz |
| Total Current Capacity | 15 A |
| UL1449 Suppression Rating | 330V |
| Protection Modes | L-N, L-G, N-G |
| Initial Clamping Level | 200V |
| Energy Dissipation | 1815 Joules |
| Peak Impulse Current | 73,000 Amps |
| Catastrophic Surge Circuit | Yes |
| Thermal Fusing | Yes |
| Over-voltage shutoff | 142 VAC ±5 VAC |
| Under-voltage shutoff | 90 VAC ±2 VAC |
EMI/RFI Noise Filtration
| Banks 1, 2, 3, 4 | 80 db, 100 KHz &minus 2 MHz |
| Bank 3, High Current Outlets | 60 db, 100 KHz − 2 MHz |
| Common Mode (all banks) | 60 db, 100 KHz − 2 MHz |
DC Trigger Input
| Jacks | 3.5mm (1/8") mono mini-plug |
| Voltage and Polarity | 3 - 24V DC, bidirectional |
| Current Requirement | 4.6 mA @3V, 58 mA @24V |
DC Trigger Output
| Pass through | no delay |
| Positive = Tip, Negative = Ring |
LAN Circuits
| Clamping Level | 8V ±2V |
| Wires Protected | 4-Wires, Pins: 1, 2, 3 and 6 |
| Connectors | RJ-45 |
| Fuseless/Auto-resetting | Yes |
| Clamping Level | 260V |
| Capacitance | 30pf (approx.) |
| Suppression Modes | Metallic & Longitudinal |
| Wires Protected | 2-Wire, Pins 4 & 5 |
| Connectors | RJ-11 |
| DSL Compatible | Yes |
HD Satellite TV Circuit
| Bidirectional | Yes |
| Shielded | Yes |
| Clamping Level | 27V |
| Attenuation | <1db from 950MHz - 2.05GHz <2.4db @ 2.2GHz |
| Connections | Female "F", Gold Plated |
HD Cable TV Circuit
| Bidirectional | Yes |
| Shielded | Yes |
| Clamping Level | 1.4V |
| Attenuation | <1db from 5MHz - 950MHz |
| Connections | Female "F", Gold Plated |
(click any image to view larger)
Buy now from an authorized online dealer of Panamax products.
- Datasheet
M5300-EX, L549 - ManualM5300-EX
- View All Literature
