A/V Components
Max 5300-EX

Improves Picture and Sound Quality

Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5300-EX is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

Clean Power Level 4

Improves picture and sound quality by eliminating noise across the entire AC bandwidth. 40% more efficient at eliminating noise than Clean Power Level 3.

AVM (Automatic Voltage Monitoring)

Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.

Indicator Lights

Shows the power status as well the incoming voltage.

11 outlets

4 always on, 4 switched, 2 high current, and 1 front panel convenience outlet.

3 Isolated Outlet Banks

Isolating outlet banks from one another prevents noise contamination between components.

12 Volt Trigger

Allows source equipment to activate or deactivate the outlets on the M5300-EX.

Coaxial Signal Line Protection

2 HD Sat and 2 HD CATV.


Rack mount brackets are included.


Dimensions 17" x 12.75" x 3.5" (4.1" Including feet)
Weight 17 lbs.
Rack Ears Included

AC Power

Line Voltage 120V, 60Hz
Total Current Capacity 15 A
UL1449 Suppression Rating 330V
Protection Modes L-N, L-G, N-G
Initial Clamping Level 200V
Energy Dissipation 1815 Joules
Peak Impulse Current 73,000 Amps
Catastrophic Surge Circuit Yes
Thermal Fusing Yes
Over-voltage shutoff 142 VAC ±5 VAC
Under-voltage shutoff 90 VAC ±2 VAC

EMI/RFI Noise Filtration

Banks 1, 2, 3, 4 80 db, 100 KHz &minus 2 MHz
Bank 3, High Current Outlets 60 db, 100 KHz − 2 MHz
Common Mode (all banks) 60 db, 100 KHz − 2 MHz

DC Trigger Input

Jacks 3.5mm (1/8") mono mini-plug
Voltage and Polarity 3 - 24V DC, bidirectional
Current Requirement 4.6 mA @3V, 58 mA @24V

DC Trigger Output

Pass through no delay
Positive = Tip, Negative = Ring  

LAN Circuits

Telephone Circuit

Clamping Level 8V ±2V
Wires Protected 4-Wires, Pins: 1, 2, 3 and 6
Connectors RJ-45
Fuseless/Auto-resetting Yes
Clamping Level 260V
Capacitance 30pf (approx.)
Suppression Modes Metallic & Longitudinal
Wires Protected 2-Wire, Pins 4 & 5
Connectors RJ-11
DSL Compatible Yes

HD Satellite TV Circuit

Bidirectional Yes
Shielded Yes
Clamping Level 27V
Attenuation <1db from 950MHz - 2.05GHz
<2.4db @ 2.2GHz
Connections Female "F", Gold Plated

HD Cable TV Circuit

Bidirectional Yes
Shielded Yes
Clamping Level 1.4V
Attenuation <1db from 5MHz - 950MHz
Connections Female "F", Gold Plated

(click any image to view larger)

Max 5300-EX

Max 5300-EX

Max 5300-EX

Dealer Locator
Shop Online

Buy now from an authorized online dealer of Panamax products.