Price: $699.95
Voltage Regulation
Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.
Improves Picture and Sound Quality
Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components
The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Clean Power Level 4+
Panamax PM family’s highest level of power filtration plus voltage regulation ensure components receive a consistent level of clean power. Improves picture and sound quality by eliminating noise across the entire AC bandwidth.
Voltage Regulation
Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.
High Current Outlets
2 outlets for equipment with high power demands (Amps/Subwoofers).
USB Charger
Convenience charger for mp3 players, cell phones, and other small electronics.
Gaming LAN Port
Easy access to LAN port on front panel. Perfect for online gaming.
5 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
12 Volt Trigger
Allows source equipment to activate or deactivate the outlets on the M5400-PM.
Power Sequencing
Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
11 Outlets
5 Always On, 4 Switched, 2 Switched High Current.
General
| Dimensions | 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet) |
| Weight | 36 lbs. |
AC Power
| Catastrophic Surge Circuit | Yes |
| Auto-Resetting Over-voltage shutoff | 142 VAC ± 8 VAC |
| Auto-Resetting Under-voltage shutoff | Yes |
| Thermal Fusing | Yes |
| Line Voltage | 120V, 60Hz |
| Initial Clamping Level | 200V |
| UL1449 Suppression Rating | 330V |
| Protection Modes | L-N, L-G, N-G |
| Maximum Current Rating | 15 A |
| Energy Dissipation | 2125 Joules |
| Peak Impulse Current | 72,000 A |
EMI/RFI Noise Filtration
| Banks 1, 2, 3, 4 | 80 db, 100 KHz − 2 MHz |
| Bank 5, High Current Outlets | 60 db, 100 KHz − 2 MHz |
Voltage Regulation (Banks 1-4)
| Power / Current | 1500 VA / 12A |
| Input Voltage Range | 100-136 VAC |
| Output Voltage Range | 120 VAC ± 6 VAC |
| Buck Stage | reduces voltage in the 125-136 V range |
| Boost Stage 1 | boosts voltage in the 109-119 V range |
| Boost Stage 2 | boosts voltage in the 100-109 V range |
DC Trigger Input
| Jacks | 3.5mm (1/8" mono mini-plug) |
| Voltage and Polarity | 3 - 24V DC, Bidirectional |
| Current Requirement | 4.6 mA @3V, 58 mA @24V |
DC Trigger Output
| Pass through | no delay |
| Positive = Tip, Negative = Ring |
LAN Circuits
| Clamping Level | 52V |
| Wires Protected | 8-Wires |
| Connectors | RJ-45 |
USB Circuit
| Jacks | USB-A |
| Packaging Length | 19.25" |
| Power Delivery | 500 mA @ 5VDC |
Telco Protection
| Fuseless/Auto-resetting | Yes |
| Clamping Level | 260V |
| Capacitance | 30pf (approx.) |
| Suppression Modes | Metallic & Longitudinal |
| Wires Protected | 2-Wire, Pins 4 & 5 |
| Connectors | RJ-11 |
Universal Coax Protection
| HD 1080 i/p Ready | Yes |
| Bidirectional | Yes |
| Shielded | Yes |
| Clamping Level | 75V |
| Frequency Range | 0 MHz - 2.2 GHz |
| Insertion Loss | < 0.5 dB |
| Connections | Female "F", Gold Plated |
Warranties
$5,000,000 LIFETIME LIMITED CONNECTED EQUIPMENT PROTECTION POLICY
Click here for full warranty details and restrictions.
3 YEAR PRODUCT WARRANTY
Panamax warrants to the purchaser of this Panamax audio/video component style power conditioner, for a period of three (3) years from the date of purchase, that the unit shall be free of any defects in design, material or workmanship, and Panamax will repair or replace any defective product up to three years from the purchase date.
WARRANTY LIMITATION FOR INTERNET PURCHASERS:
Panamax products purchased through the Internet do not carry a valid Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer! Authorized Panamax Internet Dealers have sufficient expertise to insure warranty compliant installations.
(click any image to view larger)
Buy now from an authorized online dealer of Panamax products.
- Datasheet
M5400-PM, L591 - Manual
M5400-PM - View All Literature
