

COMBINES POWER MANAGEMENT, SURGE PROTECTION WITH AVM AND BATTERY BACKUP TO PROVIDE THE COMPLETE SOLUTION!
Panamax’s MX5102 is specially designed and engineered for home theater systems. In addition to power management the battery backup prevents processor controlled devices and hard drive based sources from losing critical data and set up configurations, as well as allowing for a proper shut down procedure.
Battery Backup
MX5102 prevents critical equipment from losing setup configuration, stored data and hard-disk crashes. Shuts off projection equipment via IR control to allow the projector bulbs to go through a proper cool-down cycle before shutting off.
Improves Picture and Sound Quality
Level 3 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Reduces Cross-Contamination Between Components
The MX5102 is designed to provide noise isolation between 4 isolated outlet banks including 2 high current, and 2 battery backup outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamax’s patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red LED will be displayed on the front panel, and power to the connected equipment is automatically turned off for all outlets except for the battery connected outlets, if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Audioholics Consumer Excellence Award 2010
Winner — Accessories/Power Conditioners
Panamax MX5102

Custom Retailer Exc!te Award 2009
Winner — Best Power Conditioning Product
Panamax MX5102

Residential Systems Resi Award 2009
Winner — Best Power Management Product
Panamax UPS Family

Audioholics Consumer Excellence Award 2009
Winner — Accessories/Power Conditioners
Panamax UPS Family
Battery Backup
600VA UPS, 2 Outlets
Clean Power Level 3
Improves picture and sound quality by eliminating noise across the entire AC bandwidth. 60% more efficient at eliminating noise than single stage linear filtration (Level 2).
4 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
High Current Outlets
2 outlets for equipment with high power demands (Amps/Subwoofers).
Digital Volt Meter
Monitor the voltage supplying your home theater equipment.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
12 Volt Trigger
Allows source equipment to activate or deactivate the outlets on the MX5102.
Power Sequencing
Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
10 Outlets
4 Switched, 2 Battery Backup, 2 Switched High Current, 2 Always On.
Dual Learning IR Function
Panamax's Patent-Pending Learning IR Function lets you program the UPS to send standby or shut-down commands to components such as DLP ceiling projectors.
General
| Dimensions | 17”W x 13”D x 4”H |
| Weight | 27 lbs. |
| Product Warranty | 3 Years |
AC Power
| Line Voltage | 120V, 60Hz |
| Total Current Capacity | 12 A |
| Energy Dissipation | 1800 Joules |
| Catastrophic Surge Circuit | Yes |
| Thermal Fusing | Yes |
| Overvoltage Shutoff, fast rise | 150 ± 5V |
| Overvoltage Shutoff, slow rise | 132 ± 5V |
| Undervoltage Shutoff | 90 ± 5V |
EMI/RFI Noise Filtration
| Attenuation | 30dB min from 100kHz-2MHz 50dB max @ 270kHz |
UPS Output
| Voltage | 120 ± 5% Simulated Sine Wave |
| Frequency | 60 Hz ± 1% |
| UPS Output Capacity | 600VA 360W @ 0.6f |
| UPS Backup Time | 3 minutes at full load |
| UPS Transfer Time | < 10ms |
DC Trigger Input
| Jacks | 3.5mm (1/8”) mono mini-plug |
| Voltage and Polarity | 3 - 18V DC, bidirectional |
| Current Requirement | 4.6 mA @ 3V, 58 mA @ 24V |
LAN Circuits
| Clamping Level | 50V |
| Jacks | RJ-45 |
| Wires Protected | 8-Wires |
Telephone Circuit
| Fuseless/Auto-Resetting | Yes |
| Clamping Level | 270V |
| Suppression Modes | Metallic & Longitudinal |
| Jacks | RJ-11 |
| Wires Protected | 2-Wires, Pins 4 & 5 |
Cable and Satellite Circuits
| HD 1080 i/p Ready | Yes |
| Bidirectional | Yes |
| Shielded | Yes |
| Clamping Level | 75V |
| Frequency Range | 0MHz - 2.2 GHz |
| Insertion Loss | < 0.5 dB |
| Connections | Female ”F”, Gold Plated |
Warranties
3 Year Product Warranty
Panamax warrants to the purchaser of this Panamax audio/video component style power conditioner, for a period of three (3) years from the date of purchase, that the unit shall be free of any defects in design, material or workmanship, and Panamax will repair or replace any defective product up to three years from the purchase date.
$5,000,000 LIFETIME LIMITED CONNECTED EQUIPMENT PROTECTION POLICY
Click here for full warranty details and restrictions.
2 Year Battery Warranty
Panamax warrants to the purchaser of this uninterruptible power supply, for a period of two (2) years from the date of purchase, that the batteries shall be free of defects in design, material, or workmanship, and Panamax will replace any defective battery.
WARRANTY LIMITATION FOR INTERNET PURCHASERS:
Panamax products purchased through the Internet do not carry a valid Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer! Authorized Panamax Internet Dealers have sufficient expertise to insure warranty compliant installations.
- Datasheet
MX5102, L616 - Manual
MX5102, INS00850 - Manual
MX5102 Addendum, INS00851 - View All Literature








