Improves Picture and Sound Quality
The M10-HT-PRO’s Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage
The M10-HT-PRO senses sustained voltages that are high enough to cause damage to your components, and shuts the power down before damage can occur.
Reduces Cross-Contamination Between Components
The M10-HT-PRO is designed to provide noise isolation between 3 isolated outlet banks so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Premium Filtration
Improves Picture and Sound. Provides clean power by filtering out noise common to household power.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
Coax/Sat Protection
Protects equipment from electrical surges that travel over Cable, Satellite, and Antenna lines.
12 Volt Trigger
Allows source equipment to activate or deactivate the delayed outlets on the M10-HT-PRO.
Telephone Line Protection
Protects equipment from electrical surges that travel over Telephone lines.
3 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
10 Outlets
4 digital-ultrasonic noise filtered outlets, 3 Linear Filtration outlets, 3 Linear Filtration outlets with sequenced activation.
Surge Protection
In the event of a catastophic surge such as lightning, it completely disconnects AC power to connected equipment
Hi Def Ready
Hi-Def Designed to work with your High Definition system.
General
| Dimensions | 23.5 in. L x 3.75 in. W x 3.5 in H |
| Weight | 5 lbs. |
AC Power
| Thermal Fusing | Yes |
| Line Voltage | 120VAC, 50/60Hz |
| Initial Clamping Level | 200V Peak, 141V RMS |
| Over-voltage shutoff | 137V |
| UL1449 Suppression Rating | 330V |
| Protection Modes | L-N |
| Maximum Current Rating | 15 A |
| Energy Dissipation | 575 Joules |
| Peak Impulse Current | 21,000 Amps |
| EMI/RFI Noise Filtration | 53 dB (100kHz - 1 MHz) |
| Response Time | < 1n |
DC Trigger Input
| Jacks | 3.5mm mono mini-plug |
| Voltage and Polarity | 3 - 24V DC, bidirectional |
| Current Requirement | 4.6 mA @3V, 58 mA @24V |
Telco Protection
| Clamping Level | 600V |
| Capacitance | 30pf (approx.) |
| Suppression Modes | Metallic |
| Wires Protected | 2 wire, 1 pair (3,4) |
| Connectors | RJ-11 |
Universal Coaxial Protection
| HD 1080 i/p Ready | Yes |
| Bidirectional | Yes |
| Shielded | Yes |
| Clamping Level | 90V |
| Frequency Range | 5MHz - 2200 GHz |
| Insertion Loss | < 0.1 dB |
| Connections | Female “F” |
Warranties
$5,000,000 LIFETIME LIMITED CONNECTED EQUIPMENT PROTECTION POLICY
Click here for full warranty details and restrictions.
LIFETIME LIMITED PRODUCT WARRANTY
Panamax warrants to the purchaser of any standard Panamax surge protector that the surge protector shall be free of defects in design, material, or workmanship, and Panamax will repair or replace any defective unit.
WARRANTY LIMITATION FOR INTERNET PURCHASERS:
Panamax products purchased through the Internet do not carry a valid Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer! Authorized Panamax Internet Dealers have sufficient expertise to insure warranty compliant installations.
(click any image to view larger)
Buy now from an authorized online dealer of Panamax products.
- Datasheet
M10-HT-PRO, L581 - ManualM10-HT-PRO
- View All Literature
