Firewall for Noise™ Circuitry
This technology provides enhanced Neutral-to-Ground Noise Filtration for your digital office equipment. EMI/RFI noise can contaminate the equipment safety ground, which in turn will contaminate the connected digital equipment, and prevent it from operating at peak performance levels.
This circuit features an improved 2-stage common-mode architecture that provides compatibility for GFCI's and NEC article 250.6. Complies with UL 1283 : Electromagnetic Interference Filters.
Circuitry prevents EMI/RFI noise from contaminating the connected digital equipment through the ground wiring.
Automatic Voltage Monitoring (AVM)
This power monitoring system acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over-voltage or under-voltage and disconnects the power to the connected equipment, then reconnects it when the power returns to a safe level. It even protects the MIP-15LT unit.
SignalPerfect™ Telephone Line Protection
Two pairs of RJ-11 phone jacks are available to protect two, single-line telephone modem (pins 4,5 protected) with fuseless Auto-Resetting technology and optimized circuitry to ensure a clean, clear signal.
Wiring Fault Safety Shutoff
This technology will detect a miswired wall receptacle or an open-ground by monitoring the voltage between neutral and ground. If an unsafe condition exists, the MIP-15LT will disconnect the power from the connected equipment.
CAT5e Ethernet LAN Protection
RJ-45 jacks are available to protect one Ethernet 10/100/1000BASE-T network conection (all pins protected).
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
Separate protection circuits for 10/100/1000 BaseT Ethernet and telephone.
CAT5e LAN Protection In/Out RJ-45 bi-directional connectors
Unsafe Power Indicator light
Line Fault Indicator light
Ground OK Indicator light
Power/Filtration OK Indicator light
Three-stage, GFCI Compatible filter circuit provides high levels of Normal and Common mode EMI/RFI noise filtration.
Exclusive Protect or Disconnect™ circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment
Eight foot power cord
Two rubber strips running the length of the product provide a non-slip grip and prevent marring surface
RJ-11 In/Out connectors (2 telco cables included)
Two Always-on AC outlets
Includes security lock to prevent theft
10.25 in. W x 4.75 in. D x 2.5 in. H
|Maximum Current Rating||
|EMI / RFI Noise Filtration||
65 dB (100KHz - 1 MHz)
|Automatic Voltage Monitoring (AVM) Circuit||
138V ± 8V
86V ± 6V
|Protect or Disconnect™ Circuitry||
|Single Pulse Energy Dissipation||
|Peak Impulse Current||
|UL 1449 3rd Edition Voltage Protection Rating||
|Initial Clamping Level||
8 ft fixed
L-N, L-G, N-G
|Surge Response Time||
< 1 nanosecond
10/100/1000 Base-T LAN Protection
RJ-45, pins 1-8
All pins to ground
RJ-11/45, pins 4, 5
Metallic & Longitudinal
30 pf (approx.)
$5,000,000 LIFETIME LIMITED CONNECTED EQUIPMENT PROTECTION POLICY
Click here for full warranty details and restrictions.
LIFETIME LIMITED PRODUCT WARRANTY
Panamax warrants to the purchaser of any standard Panamax surge protector that the surge protector shall be free of defects in design, material, or workmanship, and Panamax will repair or replace any defective unit.
WARRANTY LIMITATION FOR INTERNET PURCHASERS:
Panamax products purchased through the Internet do not carry a valid Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer! Authorized Panamax Internet Dealers have sufficient expertise to ensure warranty compliant installations.